U.S.Robotics 802.11g Guía Breve De Instalación página 8

Step Three: Connect the 802.11g 54Mbps USB Adapter to a Wire-
less Router
You should now see a small icon for the Configuration Utility in
the system tray by your clock on your computer desktop. The
Configuration Utility is used to change or verify the configura-
tion information that relates to your 802.11g 54Mbps USB
Adapter. The Configuration Utility icon will be colored to indicate the status of your wireless connec-
tion: red for disconnected, yellow for connected with fair quality, and green for connected with good
quality. The 802.11g 54Mbps USB Adapter will automatically connect to an available Wireless
Router. You will need to verify that you are connected to the correct Wireless Router.
Double-click the Configuration Utility icon. When the Configuration Utility launches, you can view
the connection information in the Configuration tab and in the Link Information tab. If you are not
connected to the correct Wireless Router, you can either scan for a Wireless Router to connect to or
enter the information for a specific Wireless Router.
To scan for a Wireless Router, click the Site Survey tab. Locate the Wireless Router you want to con-
nect to in the list and double-click it. If you do not see the Wireless Router in the list, click Scan to
search for the Wireless Router.
If security is enabled in the Wireless Router you want to connect to or if you want to manually enter
the configuration information, you will need to set up a profile. For information about how to do
this, refer to the Navigating the Wireless Configuration Utility section of the User Guide on the
Installation CD-ROM.
When you have connected to an existing wireless net-
work, click the Link Information tab. You will see a pic-
ture with a computer and a wireless device. If you see
a graphic representing signal waves between the com-
puter and the wireless device, you are connected to
the wireless network.
If you cannot connect to the Internet or to the correct Wireless Router, verify your configuration set-
tings and then refer to the Troubleshooting section in this Guide or in the User Guide on the Installa-
tion CD-ROM.
Congratulations!
You have finished installing the 802.11g 54Mbps USB Adapter.
4