Connect With Mi Home / Xiaomi Home App - Xiaomi Mi XMKDDYJ01HT Manual De Usuario

Powering On
To turn on the printer, press and hold the power bu on for 2 seconds
until the status indicator turns white. The printer will then wait for a
pairing with a Bluetooth device, and the Bluetooth indicator is turning
into orange.
On/Off Bu on Instruction
2 seconds
6 times
Note: Pressing or pressing and holding the on/off bu on will not interrupt a
firmware update.

Connect with Mi Home / Xiaomi Home App

This product works with Mi Home / Xiaomi Home app*. Control your device with Mi
Home / Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search "Mi Home / Xiaomi
Home" in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow
prompts to add your device.
Once the printer is successfully connected to your phone, you can use Mi
Home/Xiaomi Home app to print photos.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the
app displayed on your device should be taken as the default.
Note:
The version of the app might have been updated, please follow the instructions
based on the current app version.
MI PHOTO PRINTER
Press and hold
Continuously press 6 times
Turning On/Off
Restoring factory se ings
02