Maintenance And Care - BEAUTURAL 1-JU12UK01 Manual De Instrucciones

4. Screw the spray nozzle with fitted attachments onto
EN
the spray bottle 13 .
DE
FR
ES
IT
5. Pull the microfibre cover 16
the wiper attachment and secure it
using the velcro fastener.
6. Spray the window surface you wish to clean.
7. Using the microfibre cover 16
debris.
Vacuuming Using the Vacuum Cleaner
1. Press the power button 6 . The indicator light
Note: If the indicator light flashes red during use, this indicates the
cleaner needs to be charged (see section on "Charging the Cleaner").
2. Move the vacuum head slowly from top to bottom across the wet surface.
Water will be sucked into the waste container
3. After you have finished a section, always start again at the top.
4. Once the MAX mark on the waste container
cleaner and empty the waste container
5. Pull out the rubber plug on the front of the waste container and pour out
the dirty water. After, close the plug and start vacuuming again.
6. Once the entire surface is dry, press the power button again to turn the
cleaner off. The indicator light will switch off.
7. If necessary, dry off any streaks or remaining moisture on the surface with a
dry cloth.
over
, wipe over the sprayed area to loosen dirt and
5 will light up blue.
3 .
3 is reached, switch off the
3 .
6

Maintenance and Care

• Prior to cleaning, disconnect the cleaner from the power adapter to avoid
risk of electric shock!
• Do not use abrasive or aggressive cleaning materials. These can damage the
surface of the cleaner!
Cleaning the Spray Bottle
1. Open the spray bottle and empty its contents.
2. Remove the microfibre cover 16 .
3. Wipe the components of the spray bottle with a damp cloth; if necessary,
use a little mild detergent on the cloth.
Washing the Microfibre Cover
• The microfibre cover 16 can be machinewashed at 60°C. Do not use any
fabric conditioner as this significantly reduces the cleaning power of the
microfibre.
• Do not bleach the microfibre cover
• Do not tumble dry the microfibre cover
• Do not iron the microfibre cover 16
Cleaning the Window Cleaner
For thorough cleaning, disassemble the cleaner.
1. Press the ridged area on the underside
of vacuum attachment 1 and pull the
vacuum attachment 1 off the cleaner.
Clean the vacuum attachment 1
a damp cloth. If required, use some mild
detergent on the cloth.
16 !
16 !
!
with
7
EN
DE
FR
ES
IT