Craftsman 580.752500 Manual Del Operador página 5

Tabla de contenido

Publicidad

_i, WARNING
Use of pressure washer can create
puddles and slippery surfaces.
_'
Kickback from spray gun can cause you
to fall.
• Operate pressure washer from a stable surface.
• The cleaning area should have adequateslopes and drainage to
reduce the possibility of a fall due to slippery surfaces.
• Be extremely careful if you must use the pressure washer from
a ladder, scaffolding, or any other similar location.
• Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks back.
A, WARNING
Unintentional sparking can result in fire or
electric shock.
WHENADJUSTINGOR MAKING REPAIRSTO YOUR PRESSURE
WASHER
• Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFOR ENGINESPARK
• Use approved spark plug tester.
• DO NOT check for spark with spark plug removed.
A, WARNING Starter and other rotating parts can
entangle hands, hair, clothing, or accessories.
. NEVER operatepressure washer withoutprotective housingor
covers.
. DONOT wearloose clothing,jewelryor anything that maybe
caughtin thestarteror otherrotatingparts.
* Tieup longhairand remove jewelry.
A, WARNING Risk of eye injury.
Spray can splash back or propel objects.
• Always wear indirect vented (chemical splash) safety goggles
marked to comply with ANSI Z87.1 when using or in vicinity of
this equipment.
• NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
NOTICE High pressure spray may damage fragile items
including glass.
• DONOT pointspraygun at glasswhenusingred(0°) spraytip.
= NEVER aimspraygun at plants.
NOTICE
Improper treatment of pressure washer can
damage it and shorten its life.
• If you have questions about intended use, ask dealer or contact
Sears.
• NEVERoperate units with broken or missing parts, or without
protective housing or covers.
• DO NOT by-pass any safety device on this machine.
• DO NOT tamper with governed speed.
• DO NOT operate pressure washer above rated pressure.
• DO NOT modify pressure washer in any way.
• Before starting pressure washer in cold weather, check all parts
of the equipment to be sure ice has not formed there.
• NEVERmove machine by pulling on hoses. Use handle provided
on unit.
• Check fuel system for leaks or signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure washer.
• This equipment is designedto be used with Searsauthorized parts
ONLY. If equipment is used with parts that DO NOTcomply with
minimum specifications, user assumes all risks and liabilities.

Publicidad

Tabla de contenido
loading

Tabla de contenido