unGer HIFLO Guia De Inicio Rapido página 11

HiFlo Soap Dispenser
Quick Start Guide
5. Use a small screw driver to take out the suction
seal (22).
Beware: not to damage the piston body with the
screw driver.
6. Toss out the seals you removed, they cannot be
re-used.
7. In order to assemble the piston seals, dip them
for 60 seconds in hot temperature (60 ºc/ 140ºf)
water. While still warm, insert them to their
carriers in the piston (2) using no other means
of energy than pressure created by your own
hands. Make sure that the seals are stable in
their career.
8. In order to assemble the ejector seal in it's car-
rier in the piston, apply force while sliding in the
seal, during the process the seal will extend and
shrink back to his carrier.
Make sure that the seal moves freely in it's
carrier.
www.ungerglobal.com
Quality Tools for Smart Cleaning
5
7
8
11