Bluetooth - RuarkAudio R4 mk3 Guia Del Usuario

Bluetooth

Your R4 is Bluetooth enabled and can receive music
streamed from Bluetooth devices such as a smartphone.
Press SOURCE and rotate the CONTROL KNOB or
repeatedly press SOURCE until Bluetooth is displayed,
then press the knob to select it.
To connect your device you must first establish a secure
connection to your R4, a process called pairing.
Pairing your Bluetooth device
When you have changed the source to Bluetooth, wait
until Awaiting connection... is shown and the indicator
light (33) on top flashes.
Use the Bluetooth setup on your smart device to pair
and connect it to your R4. It will appear in the list of
paired devices as Ruark R4.
When connected, Connected to [your device name]
(eg Archie's phone) is displayed.
It may take a few seconds for your R4 to appear in the
list on your device, and in some cases you may need to
input "0000" as the pairing password.
If you do not connect within a few minutes, your R4 will
stop attempting to connect and show No connection. To
connect, select MENU > Connect device.
EN-18
Connecting your Bluetooth device
As soon as you switch to Bluetooth, your R4 will display
Connecting... as it attempts to connect to the last device
it was connected to.
If that device isn't available, it displays Awaiting
connection... If a device doesn't connect within three
minutes, it will display No connection. To connect to
your R4, ensure the Bluetooth function on your device is
on and select Ruark R4 from the paired devices list on
your Bluetooth device.
Play audio
Once connected, audio from your Bluetooth device will
play through your R4. For more information on playing
audio from your Bluetooth device, refer to your device's
documentation.
NOTE: you may need to select your Ruark R4 or
Bluetooth as your audio output on your device.
Pause track
Press and then press again to play.
Your R4 includes aptX coding technology so if your
smart device is also aptX enabled, you will benefit from
CD-quality streaming.