Fm Radio - RuarkAudio R4 mk3 Guia Del Usuario

FM radio

Your R4 radio receives analogue radio from the FM band
and when available, displays the station name and radio
text using RDS/RBDS information (Radio Data System/
Radio Broadcast Data System).
Press SOURCE and rotate the CONTROL KNOB or
repeatedly press SOURCE until FM is displayed, then
press the knob to select it.
Change station
Press or to automatically tune to the next
available FM station. If RDS/RBDS is unavailable the
frequency is displayed instead.
89.80
[No RadioText]
You can change the scan setting to only stop at stations
with a strong signal by selecting
Menu > Scan setting > Strong stations.
Manual tune
Select MENU > Manual tune and rotate the CONTROL
KNOB to change the frequency. To exit manual tuning
and show RDS/RBDS data press the control knob or
wait a few seconds.
EN-22
FM radio text (RDS/RBDS)
RDS is information broadcast by some FM stations.
BBC Radio 4
Afternoon play
Choose from radio text, programme type, frequency,
signal strength and date by selecting MENU > Info.
Save preset
You can store 10 FM stations in your preset list. The
station name will be stored only when RDS/RBDS is
available. See 'Common functions' section.
Recall preset
'See Common functions' section.
For optimal reception, use an external aerial.
If using the supplied telescopic aerial, fully extend it and
adjust its position.