Technical Specifications; Transport And Storage Conditions - GNATUS Amalga Mix II Manual Del Propietário

tecHnicAl SPeciFicAtiOnS

NOMINAL TENSION
127V~
230V~
230V~
• Supply Voltage
127/220 V~
• Frequency
50/60 Hz
• Number of stages
Monophase
Special providence or particular conditions for installation
- Check the electric net, it must be compatible with the specified one in the equipment.
- Verify the thread earth, it must be turned off correctly.
OBS: These information also make part of the Manual of Installation and Maintenance of the equipment
that can be found with the authorized Gnatus technician.

transport and storage conditions

The equipment must be transported and stored with the following observations:
- Carefully, should not suffer drop and neither receive impact.
- With the side of the arrow upward.
- With maximum piling up of 13 units for storage.
- With humidity protection, not to expose to rains, sparkling of water or humidified floor.
FREQUENCY
60Hz
60Hz
50Hz
• Fuse
F1 e F2 ...........1A
• Vibration frequency
4600/min.
• Maximum oscillation
amplitude
25mm
14
CONSUMPTION
0,7A
0,4A
0,4A
• Power
See table above
• Liquid weight
3,89 Kg
• Gross weight
4,35 Kg
POWER
90VA
90VA
90VA