To The User; To The Fitter; Principles Of Operation; Application - Whale Twist DS0003B Manual De Instrucciones

List of diagrams
Fig 1 Straight Housing - Complete product
Fig 2 Straight Housing - Width and height
Fig 3 Straight Housing - Drill hole
Fig 4a Straight Housing - Insert housing
Fig 4b Straight Housing - Secure locking nut Fig 13b Fitting plumbing – Mixer models
Fig 5 Straight Housing - Insert hose
Fig 6 Angled Housing - Complete product
Fig 7 Angled Housing - Width and height
Fig 8 Angled Housing - Drill hole
Fig 9 Angled Housing - Insert housing

3. TO THE USER

Read the following carefully before installation
WARNING: Please note that incorrect installation may invalidate the warranty.

4. TO THE FITTER

Check that the product is suitable for the intended application, follow installation
instructions and ensure all relevant personnel read the points listed below. Also ensure
that these installation instructions are passed on to the end user.

5. PRINCIPLES OF OPERATION

The Whale Twist® Deck Shower has a unique innovative handset with temperature
and flow controls incorporated. Both unobtrusive housing designs compliment the sleek
lines of the boat deck. All Whale Twist® models require only a single circular hole to be
cut and simple plumbing to install.

6. APPLICATION

The Whale Twist® Deck Shower is designed for installation on flat or slightly curved
surfaces on the deck or transom of recreational marine vessels or vehicles. If it
is intended for use for any other purpose or with any other liquid, it is the user's
responsibility to ensure that the shower is suitable for the intended use and, in
particular, that the materials are fully compatible with the liquids to be used.

7. WARNINGS

Temperature Settings – To prevent scalding (regardless of the water
heating method or the control devices used), the temperature for the hot
water supplied to the faucets and showers should be controlled in the
range of 43 ºC to 60 ºC (110 º F to 140 º F) with a fail safe set at 82 ºC
(180 ºF).
Fig 10 Angled Housing - Tighten screws
Fig 11 Angled Housing - Screw covers
Fig 12 Angled Housing - Insert hose
Fig 13a Plumbing - Mixer models
Fig 14 Plumbing and hose installed
Fig 15 Plumbing connection - Cold models
Fig 16 Maintenance - mixer models
Fig 17 Operation - Removing handset
Fig 18 Operation - Twist handset
3