Publicidad
Idiomas disponibles
Idiomas disponibles
Install the hopper on the upper end of the feeding chute.
The hopper can make feeding of food ingredients more
7
convenient,
particularly when small-particle food ingredients like grapes
and
strawberries are processed
Connect to power supply and get ready for operation.
8
(Before power-on, make sure the knob is in Off position.)
Ÿ Clean the food and cut it into pieces small sufficiently to
pass through the feeding chute, and place them onto the
9
hopper.
Any hard core, seed, skin or shell shall be removed in
•
advance.
Froward:start to work
•
Off: power-off,stop the work
•
10
Reverse: rotate in reverse direction to solve food stuck
•
problem
Load the food material in through the inlet and push them in
with propelling rod.
Proper amount of force shall be used to push the food
•
material in, not excessive but sufficient to have it cut off
11
exactly.
(Do not put your finger or any other object into the inlet! If
the residue/juice container is full, disconnect the power
supply and clear it up before restart.）
Publicidad
