www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
1.1 TECHNICAL CHARACTERISTICS
Brush motor power
Voltage
Frequency
Oscillations per minute
Working width - ø brushes
Brush pressure
Motor passage height
Dry suction socket
Noise emission
Drive
Cable length
Weight (without accessories)
Size
1.2 INTRODUCTION
DANGER:
Before using the appliance, read the accom-
panying "SINGLE DISC SAFETY WARN-
INGS" booklet carefully.
This manual forms an integral part of the
machine itself. It must therefore be kept in
a safe place where it is accessible to all us-
ers (operators and maintenance personnel)
throughout the life of the machine until it is
scrapped.
1.3 - INTENDED USE OF
THE MACHINE
WARNING:
This machine is for indoor use only.
DANGER:
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
V 220 - 240
Hz 50
Hz 60
n.1500
n.1800
g/cm² 25.6
mm 270 WITH PAD H=25mm
dB(A) 59.5
mm 730X450X1200
This machine is intended for commercial use,
for example in hotels, schools, hospitals, fac-
tories, shops, offices and rental businesses.
The machine has been designed and built:
for professional use, for cleaning floors and
carpets, for polishing floors, for sanding
floors (e.g. parquet and uneven surfaces).
1.4 - NON-INTENDED USE
OF THE MACHINE
WARNING:
The machine is not intended for outdoor
use.
DANGER:
-
do not wash floors with water above 50 °C;
-
do not use diesel/petrol or corrosive de-
tergents to wash floors;
-
do not wash and suck up corrosive, flam-
mable or explosive liquids, even if diluted.
ENGLISH - 3
S 10
W 1000
V 110
Hz 50
n.1500
mm 430
YES
DIRECT
12 m
Kg 43,2
Hz 60
n.1800