Electrical Requirement (For Uk Market Only); How To Replace The Fuse - Panasonic NC-DF1 Instrucciones De Funcionamiento

Electrical Requirement
(For UK market only)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING
TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience. A 13-amp fuse is fitted in this
plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 13-amp and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of
the fuse.
If the plug contains a removable fuse cover, you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in
your home, then the fuse should be removed and the plug cut
off and disposed of safely. There is a danger of severe electrical
shock if the cut off plug is inserted into any 13-amp socket.

How to replace the fuse

The location of the fuse differs according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and
follow the instructions below. Illustrations may differ from actual
AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse and
close or attach the fuse cover.
Figure A Figure B
Fuse cover
11
NC-DF1(CZ45E154).indb 11 2016/07/04 12:53:18