Different Ways To Use The Unit; Using The Sleep Timer - Panasonic RF-U700 Instrucciones De Funcionamiento

Different ways to use the unit

Turning off the
display panel light
Press and hold
.
To turn on the display panel light,
press and hold
"LCD LIGHT ON" is displayed.
Even when the display panel
light has been turned off, it
will come back on for about 10
seconds when any of the buttons
is pressed.

Using the sleep timer

The unit's power is automatically turned off when the
set time is reached.
Press .
Each time the button is pressed, the setting changes in
the following sequence:
30 (minutes)
To display how much time remains until
the set time
Press .
Note
When the power is turned on again, the broadcast station
that was last tuned in when the power was turned off,
will be tuned in.
Selecting the sound quality
that suits the broadcast
Press .
Each time this button is
pressed, the position of
"
until
This position is
NORMAL-
recommended for
programs.
Set to this position to
M U S I C -
enjoy music.
Set to this position to listen
N E W S -
to news programs.
Set to this position when
H I G H -
high-pitched sound is hard
to hear.
60 90 120
OFF (released)
Remaining time
When FM stereo
broadcasts have a
high level of noise
Press and hold
until "MONO" is displayed.
" changes.
• Monaural sound is now heard and
• Under normal circumstances,
• To restore the original setting,
Listening to sound through
headphones (not included)
Plug type: 3.5 mm stereo
• Turn the volume down before connecting the
headphones.
Note
Avoid listening for prolonged periods of time to prevent
hearing damage.
the level of noise is reduced to
make listening easier.
e n s u r e t h a t " M O N O " i s n o t
displayed.
press and hold
until "MONO" is not displayed.
again
5
5