Preset Tuning; Rds Broadcasting; Maintenance - Panasonic RF-U700 Instrucciones De Funcionamiento

Receptor de 2 bandas de am-fm
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26

Preset tuning

A total of 20 FM stations and 12 AM stations can be preset.
Preset stations
1
Press
to select "AM" or "FM".
2
Press
to display "MANUAL".
3
Select the station to be preset using
4
When
is pressed, "M01" fl ashes for about 10 seconds.
5
While "M01" is fl ashing, select the number of the station to be preset using
. If the "M01" display was cleared before you selected the number, press
it again.
6
"MEMORY" now appears to indicate that the station has been preset.
To preset another station, repeat steps 3 to 6.
Listening to a preset station
1
Press
to select "AM" or "FM".
2
Press
to display "PRESET".
3
Select the number of the preset station using

RDS broadcasting

This unit can display the text data transmitted by the radio data system (RDS) available in some areas.
Press
.
Every time you press the button:
Note
RDS displays may not be available if reception is poor.

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
6
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
6
or
Station name (PS)
Radio text
.
.
, and press
to display

Publicidad

Tabla de contenido
loading

Tabla de contenido