Using The Remote Control; Using Your Dvd Player - Basic Operation - Insignia NS-8PDVDA Guia Del Usuario

NS-8PDVD 8-inch Portable DVD - combined.fm Page 12 Tuesday, March 7, 2006 11:59 AM

Using the remote control

1 Open the remote control battery compartment, insert the battery
(CR2025), then close the compartment.
2 To use the remote control, point it at the remote sensor on the
player. (operate in the range of 5 meters (16 feet) and 60°.
3 Remove the batteries if the remote control will not be used for an
extended period of time.
Tip Generally, batteries last for about one year. Replace the batteries if
the remote control does not work.

Using your DVD player - basic operation

Playing video and audio discs
Turning on the player
To turn on the player:
1 Open the LCD screen.
2 Turn on the player. The power LED lights and the LCD screen
turns on.
Playing discs
To load and play a disc:
1 Slide the OPEN switch to open the disc tray.
2 Hold the edges of the disc and place the disc in the center of the
tray with the printed side up.
3 Close the disc tray until it clicks. After loading a disc and closing
the tray, the player starts playing the disc.
4 Turn the VOLUME knob to adjust volume (including when using
headphones), and the BRIGHTNESS knob to adjust the screen
brightness.
If the player is connected to a TV or an amplifier, adjust the volume
on the connected unit.
5 Stop playback by pressing
control.
6 Remove the disc and turn off the player.
12
NS-8PDVDA 8" portable DVD player
(Stop) on the player or remote
www.insignia-products.com