Selection Of Transmission Mode; Selection Of Hold Function - Adam Equipment CPW plus 35 Manual De Instrucciones

EN
13.1.7

SELECTION OF TRANSMISSION MODE


The seventh parameter is to select the transmission mode.
Display will show "trn 1" (DEFAULT SET). See the HOLD
AND PRINTING TABLE in section 13.1.9.

Use the [Tare/Zero] key to scroll through the options.

Press the [Unit] key to confirm the selection and move to
the next parameter.
13.1.8

SELECTION OF HOLD FUNCTION


The eighth parameter is to set the Hold function. Display will
show "Hod 1" (DEFAULT SET). See the HOLD AND
PRINTING TABLE in section 13.1.9.

Use the [Tare/Zero] key to scroll through the options.
 If selection of "Hod 2" or "Hod 3" is made then it will lead to
SETTING OF HOLD TIME LIMIT (see section 13.1.9). The
display will show "Hold" above the weight during operation.
© Adam Equipment Company 2014
No data output
Continuous data output
Normal output when the
[Print/Hold] key is pressed
No hold function
Automatic hold function
Manual hold function
19 9009RevD2-March 2017