Publicidad
Idiomas disponibles
Idiomas disponibles
Betriebsanleitung
Putting up the optional shelving:
Check that the shelf supports are at the correct height first of all, if not, saw 3.5 cm off them and smooth any
jagged edges.
Screw the shelf supports to the drill holes in the container wall.
Hang the shelf arms onto the shelf supports.
Place the grid on the shelf arms and screw it tightly in place.
6. Specifications
See type label.
7. Operation
When storing combustible fluids comply with the fire and explosion protection regulations!
Check drums are positioned safely and secure to prevent falling over or down!
Only store drums horizontally on drum stands!
Safe filling is only possible over the collecting sump.
Access to the storage system by unauthorised persons is prohibited!
8. Maintenance and servicing
The inspection and maintenance must be carried out in accordance with the instructions of the gen-
eral operating instructions enclosed in the annex.
Doors and collecting sump must be inspected at regular intervals for good condition.
Check the firm hold of the screwed connections.
Grease the locks and hinges with commercial grease where necessary.
When replacing parts only the manufacturer's original parts may be used!
Maximum charge of snow: 1,25 kN/m². Please vacate the snow in case of overstepping
Materialcontainer
115664; 115665; 115684;115685
Seite 6 von 12 Seiten
Ausgabe 06/2007
Publicidad
