Getting started
Turning the power on/off
To turn on the camcorder, either open the LCD panel or press the Power button.
To turn off the camcorder, either close the LCD panel or press the Power button.
* If the power is not turned on after you have completed the above procedures, please check the
following have been done correctly: Batteries are correctly loaded.
The loaded battery (batteries) has enough power.
* The [Auto Off] setting may cause the camcorder to turn off after it is idle for a period of time.
Mode selection
1.
Turn on the camcorder.
2.
Use the Up button or Down button to select the desired item.
3.
Press the Right button to confirm.
Press the Left button to exit.
4.
Choosing the screen language
Power-on → enter Setting mode → select the Language item → press the Up button or Down
button to select the language → press the Right button to confirm.
Setting the date and time
Power-on → enter Setting mode → select the Clock item → press the Up button or Down button
to select numbers for the YY/MM/DD and HH:MM fields → press the Right button to confirm each
field → press the Left button to exit.
Power on
Power off