Mounting Of The Resin Cartridges - Smeg DEMI-One Manual Usuario

INSTRUMENTS
1. Remove the filter head cover.
2. Remove the tubes from the two quick connectors (IN/OUT) and lift the entire
cartridge assembly from the demineralizer base.
3. Unscrew the two resin cartridge holders from the cartridge assembly by hand or
with the use of the supplied special key. Insert the two new cartridges.
4. Place the cartridge seals on the upper face side of the resin cartridges.
5. Place the o-rings in the groove of the resin cartridge holders and screw holders
onto the cartridge assembly by hand.
6. Slide the positioning rings up the cartridge holders and drop the entire cartridge
assembly onto the demineralizer base.
7. Reconnect the tubes to the quick connectors (IN/OUT).
8. Attach the filter head cover.
Revision n° 2

MOUNTING OF THE RESIN CARTRIDGES

Figure 2
User manual DEMI-One Editing: 03/2009
26