Remus HVLP RHV100 Manual De Instrucciones página 6

L0841 RHV100 03 08.qxd
G Stay alert - Watch what you are doing. Use common sense and do not operate tool when you
are tired.
G The spray gun must not be cleaned with flammable liquids having a flash point below 21°C.
G Check for damaged parts - Before further use of the spray gun, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, free running of moving parts,
breakage of parts, mounting and any other conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired or replaced by an authorized service
centre unless otherwise indicated in this instruction manual. Have defective switches replaced
by an authorized service facility. Do not use the tool if the switch does not turn it on and off.
G Maintenance work must be carried out with care. Regularly check the power tool's connection lead,
and if it is damaged contact a reputable professional who can provide a replacement. Regularly
check the extension leads and replace when damaged.
G Have your tool repaired by a qualified person – This electric tool is in accordance with the
relevant safety requirements. Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in considerable danger to the user.
G This product is marked with the following symbol,
insulated device, belonging to (safety) class II.
G If the connection lead is damaged it must be replaced by the manufacturer or by one of their
customer service representatives, in order to avoid any possible hazards.
G Do not spray any substances with the spray gun unless you are fully aware of any potential
health risks or dangers they might pose.
G When you use electronic tools, you have to pay attention to the following security advice
because of the danger of electric shock, the risk of injury and fire danger. Please read all of the
details carefully before using the electronic tools and keep the security advice safe.
WARNING: The substances used with this spray gun (paint, thinners etc) may
contain hazardous, harmful, explosive or corrosive materials.
ALWAYS COMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS
PRODUCT AND THE MATERIAL BEING USED.
Only use the unit as detailed in these instructions.
Technical Data
Voltage
Watts
Pump Volume
Container Volume
Length of Hose
Max Viscosity
Vibration
Motor Speed r.p.m
12/3/08 8:51 am Page 6
6
which means that it is a double
230V-50Hz
580W
180ml/min
800ml
1.5M
50 DIN/Sec
2
< 2.5 m/s
30,000