Twin-Star International 23TF2587 Manual De Instrucciones página 8

9. Insert Stabilizer Frame (K) once the cooler is in the
correct position. Fasten the positioning panel with
wood screws (FF). Wedge the Stabilizer Frame
(K) between the top of the cooler and mantel.
Fasten with wood screws (FF).
Hardware Used
Screw
FF
10. Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across hearth/base as it may scratch the unit.
Connect the Insert Support Bar (H) to the inside left
and right panels, using the bolt (AA) and washer
(BB) through pre-drilled holes.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS FINAL
POSITION.
Hardware Used
Bolt
AA
BB
Washer
Fig. 9
x 5
Fig. 10
Completed
Unit
x 2
x 2
7
K
FF
Install
Insert
From
Back
Electric
Fireplace Insert
H
AA
BB