Sterling 20243 Guia De Inicio Rapido página 5

2. Install Support Framing
NOTICE: For proper countertop installation, the top of the sink
must not extend above the top of the cabinet.
Using 2x4s, construct support framing to extend along the inside
walls on each side of the base cabinet.
Measure and mark the support mounting locations; ensure the
sink rim will sit at or slightly below the top of the cabinet.
Position and level the support framing.
Secure the support framing with construction adhesive and
screws (not provided).
Cut four lengths of support framing from 2x4s to extend from the
bottom of the installed supports to the floor of the cabinet.
Secure the vertical supports with construction adhesive and
screws (not provided).
Sterling
Support
Framing
5 1307771-2-A