schulink SBT1 Manual De Instrucciones página 7

The tester is shown and the TEST
block is now red, indicating that the
tester is connected and ready
for testing.
In this screen, the user may create a
name for the tester. Swipe the "TEST
>" area of the active tester to bring
up the Edit option.
5. Press "TEST" to enter the testing
process.
6. Tab on "Press To Select Test" for a
pull-down menu.
7. Select "BATTERY TEST".
Set up test by swiping up or down
on each column to select Battery
Type, Rating and Set Capacity
(or Rated CCA).
8. Press "START TEST" to begin
testing.
At any time in the process, press
"< " to return to the previous screen.
• 7 •