hager S761-22 Manual De Instrucciones página 99

Toma radio-comandada 230 v
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Configuration
• Use the programming key to programme the following sequence:
LED
once and hold
press key
(10 s approx.)
configuration
sequence
1) To start
the sequence,
press and hold
the key until
the LED goes out
If you make a programming error, the programming LED will flash quickly.You must carry out the programming sequence again
from the start.
once
and hold
........ times*
(5 s approx.)
2) Press the key
3) Press
as many times
and hold
as the parameter
the key until
number
the LED
goes out
........ times*
4) Press the key
as many times as
the parameter value
99
once and hold
* Make a note
(10 s approx.)
of the chosen
parameter
number/value
5) To end
LED permanently
the sequence,
ON for 2 sec.
press and hold
the key until
configuration correct
the LED goes out
=
G
B

Publicidad

Tabla de contenido
loading

Tabla de contenido