Publicidad
Idiomas disponibles
Idiomas disponibles
large tent stakes (Fig. 9). Working from a
short side of the rectangular base, pull one
of the tie-downs from the pole on the left
and one from the pole on the right, to-
wards the ground in the middle of the two
poles. Drive a tent stake into the ground,
pull the excess slack out of the tie-downs
and attach the tie-down to the tent stake.
Move to the opposite side and repeat.
Once the two ends have been secured, the
two remaining sides should be secured in
the same fashion.
Step 10:
After the Tie Downs have been installed,
secure the net using twelve net stakes. Pull
the net tight and push the stakes through the
holes in the net as shown and into the soil.
The Atlantic Pond & Garden Protector is
intended to keep leaves and debris off of
the pond and was not designed to carry
heavy snow loads. Heavy snow loads may
result in collapse of the structure.
All parts below included.
• Ultra Pond Net
• Nylon Base
• Center Receptor
4
• (4) Fiberglass Poles
• (4) 12' Tie-downs
• (4) Ground Stakes
Fig. 9 (repeated)
Fig. 10
• (12) Net Stakes
• (8) Net Clips
Publicidad
