Publicidad
Troubleshooting
1.
Windows is unable to recognize my hardware. What should I do?
1.
Make sure your computer meets the minimum requirements as specified in
Section 1 of this quick installation guide.
2. You must install the Bluetooth utility BEFORE you physically install your
Bluetooth Adapter.
3. Plug the adapter into a different USB slot.
2. The Bluetooth software is unable to detect my Bluetooth-enabled device. What
should I do?
1.
Disable any software firewall programs such as ZoneAlarm or Norton Internet
Security. If your have Windows 7, Vista or XP installed on your computer, make
sure to disable the built-in firewall.
2. Make sure your Bluetooth device is powered on.
3. Make sure your Bluetooth device is within 50 meters of the TBW-107UB.
3. I cannot pair my Bluetooth device to the TBW-107UB USB Adapter. What should
I do?
1. Make sure that Bluetooth device is powered on
2. Make sure that your Bluetooth device is in pairing mode.
3. Make sure to put in the same Passkey on both devices.
4. I am not receiving 3Mbps data rate through the adapter. What should I do?
In order to get the full data rate, your Bluetooth device must support Bluetooth
V2.0 with Enhanced Data Rate (EDR).
If you still encounter problems or have any questions regarding the TBW-107UB, please
refer to the User's Guide included on the Utility & Driver CD-ROM or contact
TRENDnet's Technical Support Department.
7
Publicidad
