Netis DL4310 Manual De Instrucciones página 6

netis Wireless N ADSL2+ Modem Router Quick Installation Guide
2) Select the Internet Connection Type given by your ISP, then left-click on "NEXT".
If "Dynamic IP Address" is selected, select the Connection Type defined by your
ISP and the router will automatically receive the IP parameters from your ISP.
If "Static IP Address" is selected, enter the IP Address/Subnet Mask/ISP
Gateway/DNS Servers/Connection Type given by your ISP.
If "PPPoE/PPPoA" is selected, input the Username/ Password and select the
Connection Type given by your ISP.
If "Bridge Mode" is selected, select the Connection Type defined by your ISP.
3) Configure your wireless network name (SSID) and password, and then left-click on "NEXT".
4) Left-click on "NEXT" and then "CLOSE" to save the current settings. Quick Start will be finished.
Tip 1:
Default IP address: 192.168.1.1
Default SSID: netis
Default wireless password: password
Tip 2:
After the basic Internet settings, you may open some popular websites to
check your Internet connection. If you cannot access the Internet, please
refer to the instructions in "Troubleshooting".
4
Default login username: guest
Default login password: guest