Installation; Base Installation; Door Handle Installation; Door Position Adjustment - Westinghouse QL302 Manual Del Usuario

Installation

BASE INSTALLATION

1 . Unpack the unit and place the sink (D) on a blanket or
cardboard to protect the surface .
2 . Turn the cabinet (E) upside down onto the protective surface .
3 . Gently attach the cabinet base (C) onto its proper location .
Using the supplied base screws (BB), attach the base to the
cabinet .
4 . Attach cabinet feet (B) to the base . Retract each leveling foot
all the way down .
5 . Gently place the cabinet upright .
CAUTION:
Do not place side load onto feet when rotating
the cabinet .
D
E
QL302
C
BB
B

DOOR HANDLE INSTALLATION

1 . Insert the door handle screws into the pre-drilled holes in each
door .
2 . Attach the door handles and hand tighten the door handle
screws using a screwdriver .
A

DOOR POSITION ADJUSTMENT

If the doors need to be repositioned, the hinges can be adjusted to
ensure a precise fit with the cabinet.
1 . The lateral adjustment screw adjusts the door left or right .
2 . The horizontal adjustment screw adjusts the door left or right.
3 . The vertical adjustment screw adjusts the door left or right .
6
AA
1
2
3