Assembly And Installation - babymoov Jump’n Go Manual De Instrucciones

The model you have purchased may be slightly different to the model
EN
outlined below.
Important notice: Read these instructions carefully before use and keep
them for further reference. Failure to follow the instructions could lead to injury
of the child.
Thank you for choosing our 3 in 1 Jump'n Go Babymoov Walker. The walker comes in
trendy colours, is adaptable, and in compliance with EN 1273 safety norms, ensuring
highest safety standards at all times.
Age: 6 to 24 months (may vary according to the infant's build).
Batteries: 2 x AA batteries (not included).
Maximum load: 12 kg (baby walker).
Space for: one child.
Weight: 7.4 kg.
Dimensions: 70.5 cm x 65.4 cm x 53.3 cm.
1. Side bars
Insert the side bars in the seat. Make sure that they have snapped into place.
2. Wheels
Place the two swivel wheels at the front of the baby walker frame. Make sure they are snapped firmly in place.
3. Seat
Mount the seat on the base using the notches provided. Make sure the seat has locked into place.
4. Walker windshield
Lock the windshield into position using the catches provided. Make sure that the windshield has snapped into place.
5. Activity tray
Snap the activity tray and two hand grips into place using the catches provided.
6. To insert and remove the batteries
Unscrew the cover of the battery compartment beneath the baby walker play tray using a screwdriver. Insert the
two AA batteries correctly (polarity).
Screw the compartment lid back in place. Do the reverse operation to remove the batteries.
7. "Light and Sound" car top
Secure the car top of the walker to the tray (a).
In order to remove the top from the car, you just need to slightly push apart the two wheels (b).
Then you can easily take off the top.
8. How to adjust the seat height
The 3 in 1 Jump'n Go walker is designed so that the height can be adjusted (3 heights) to suit your child.
Lift or lower seat to the desired position - 1, 2 or 3 - and turn the knob to the « lock » position in order to lock the
seat in place.
CAUTION:
Always check that the seat has locked into the right height position before putting the child in the walker.
6
FEATURES

ASSEMBLY AND INSTALLATION

3 IN 1 JUMP'N GO BABY WALKER • Instruction Manual