Roche ACCU-CHEK Performa Nano Instrucciones De Uso página 12

2
Blood Glucose Tests
Before you perform your first blood glucose test, set up the meter correctly. You need the meter with
pre-inserted activation chip, a test strip, a lancing device, and a lancet.
1
Prepare the lancing
device.
Wash and dry your
hands.
5
When the blood drop Gently squeeze your
symbol flashes, perform finger to assist the blood
a fingerstick with the flow.
lancing device.
This helps you get a
blood drop.
10
52493_07214103001_EN.indb 10
2 3
Check the use by date
on the test strip
container.
Do not use test strips
past the use by date.
6
Touch the blood drop to the front edge of the
yellow window of the test strip.
Do not put blood on top of the test strip.
The meter beeps and flashes when there is
enough blood in the test strip.
4
Insert the test strip into
the meter in the direction
of the arrows.
The meter turns on and
beeps.
7
6/13/14 2:32 PM