Technical Specifications - Metabo KT 1441 Instrucciones De Manejo

Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
2002/96/EC on used electronic and elec-
tric equipment and its implementation in national
legal systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.

14 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
M = Torque
L = Cut length
P = Nominal power input
1
P = Power output
2
Sawing chain:
T = Chain pitch
D = Thickness of driving links
(lower section)
A = Number of driving links
- Cutter with depth limitation and safety
connecting links.
- Cutter shape: low profile, half chisel
v = Chain speed in idling
K
s = Adjustable oil delivery volume
Oil
V = Oil reservoir volume
Oil
m = Weight without mains cable
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745
a = Typical estimated acceleration in the
h
hand/arm area (Sawing soft wood)
K = Uncertainty (vibration)
h
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly
reduce the exposure level over the total working
period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Typical A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level as per
WA
2000/14/EC
K , K = Uncertainty (noise level)
pA WA
L = Guaranteed acoustic power level as
WA(G)
per 2000/14/EC
During operation the noise level can exceed
85 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
21