If you are using M4 washers (G), place them between the spacers and TV brackets
3
and over the holes in the TV brackets. If you are using M6/M8 washers (H), place
them over the holes in the TV brackets. Insert screws (F, K, or N) through the
washers, TV brackets, and spacers.
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
4
If you are using M4 (G) washers (only),
place them both in front of and behind
www.dynexproducts.com
DX-DTVMFP23
or
or
the brackets.
13