Osd Operation - Fracarro CB-700WDR Manual Del Usuario

3.2 OSD Operation

ENTER button
Start to operate the OSD menu
I. Press the ENTER button to bring up the OSD main menu to start operating OSD menus.
II. Select items with the cursor buttons
Use buttons  and  to move the cursor up and down.
Use buttons  and  to switch the modes or to adjust the parameters or the values of the settings.
III. Switch to the sub-menu
Items with the symbol " " in the end contain sub-menus. For further settings of those items, select the
desired item with the button  or  and press the ENTER button to bring up the sub-menu and edit.
SETUP MENU
LENS
SHUTTER/AGC
NR
WHITE BAL
ATR
BACKLIGHT
DAY/NIGHT
NEXT
EXIT
IV. Return to the previous page
Select RETURN and press the ENTER button to return to the previous page.
V. Exit the OSD menu
Select EXIT with the button  or  and press the ENTER button to exit the OSD menu.
NOTICE: Before exit the OSD menu, please click SAVE ALL
made. Fail to do that, all the settings will not take effect once the power is reconnected.
AUTO
AUTO
ATW
OFF
OFF
AUTO
SAVE ALL
SETUP MENU
LENS
SHUTTER/AGC
NR
WHITE BAL
ATR
BACKLIGHT
DAY/NIGHT
NEXT
EXIT
AUTO IRIS
TYPE
MODE
SPEED
RETURN
21
AUTO
AUTO
ATW
OFF
OFF
AUTO
SAVE ALL
DC
AUTO
IIIIIIIIIIIIIIIIII 080
to save all the settings