Function
Option
NR MODE
Y LEVEL
C LEVEL
4.4 WHITE BAL (White Balance)
The screen color can be adjusted by using the WHITE BAL function.
Please use the and buttons to WHITE BAL on the SETUP MENU and press the ENTER button to do
further settings.
Select to set the white balance Mode.
Function
Option
ATW
PUSH
USER1
USER2
WHITE BAL
ANTI CR
MANUAL
PUSH
LOCK
4.4.1 ATW (Auto Trace White Balance)
Function
SPEED
DELAY CNT
ATW FRAME
x0.50; x1.00; x1.50; x2.00
ENVIROMENT
INDOOR; OUTDOOR
OFF
Y
C
Y/C
000-015
000-015
SETUP MENU
LENS
SHUTTER/AGC
NR
WHITE BAL
ATR
BACKLIGHT
DAY/NIGHT
NEXT
EXIT
This mode can be used within the color range from 2,500°K to 9,000°K (e.g.: fluo-
rescent light, inside and outside the tunnel). Press ENTER to open the submenu
The camera will find the best settings in any condition.
Adjust the color temperature to 3,200°K for indoor spaces lit with neon lights.
Press ENTER to open the submenu and select the R and B settings manually
Adjust the color temperature to 6,300°K for shooting outdoors.
Press ENTER to open the submenu and select the R and B settings manually
Press ENTER to open the submenu and select the R and B level.
When regulating R, the B component will also be automatically updated (color
For a proper setting, point the camera to a white piece of paper and press ENTER.
Select PUSH LOCK when it is dark or the color temperature is high around the
object or when there is a fluorescent light around the object or when the light is
Option
000-255
000-255
Meaning
Select to set the 2D NR filter mode.
OFF: Y and C filters OFF
Y: Y filter ON
C: C filter ON
Y/C: Y and C filters ON
Select to set the Y filter strength
Select to set the C filter strength
AUTO
AUTO
ATW
OFF
OFF
AUTO
SAVE ALL
Meaning
Enable Color Rolling blanking mode
range from 1,800°K to 10,500°K).
constantly changing.
Select to adjust the pull-in speed of ATW.
Select to set the time-based hysteresis of ATW.
Select to set the pull-in frame magnification.
Select to set the pull-in frame (indoor/outdoor) of ATW.
24
Meaning