Rechargeable Battery Flashlight LHS 55 A1
Appendix
Cleaning
To clean the flashlight use a dry cloth. Never use
any solvents or cleaners that may damage the
plastic housing. Make sure that no liquid gets into
the housing. If the product is very dirty, use a
slightly moistened cloth otherwise the device may
suffer damage.
Servicing
The LEDs and the battery cannot be replaced.
Replacing the Bulb
The built-in H3 halogen bulb must be replaced
by authorized service personnel only.
After the lamp has cooled down, unscrew the
reflector ring [3] counter-clockwise.
Carefully remove the reflector [2] forwards.
Slide the insulation hose apart and disconnect
the bulb from the cable.
Press the holding wire of the bulb together,
unhook it from the holder and remove it.
Next remove the bulb.
Replace the H3 6 V/55 W bulb by a new bulb of
the same type.
English - 65