M.-Nr. 11655860
en-US
Installation instructions - Fluff filter compartment APWM 9000
Parts included
Quantity Mat. no.
Designation
1
Filter housing
1
Fluff filter
1
Lid
2
Mounting bracket
8
M6 nut
8
8.4 washer
1
DN 70 connection
1
Label - "Caution: Hot surfaces"
The "Miele Service Documentation" (MSD) service application is required for all service work
The warning and safety instructions given in the model-specific technical service documentation must be observed.
Service work must be done following the model-specific work instructions.
Danger due to incorrect service work
WARNING
Danger due to incorrect service work.
There is a risk of serious damage, injury, or even death if service work is carried out incorrectly.
A
Service work may only be carried out by a qualified service technician with specialist training, knowledge and
experience.
A
All applicable safety guidelines must be followed.
A
Wear personal protective equipment.
A
Read the Miele service documentation before starting service work.
Risk of scalding when carrying out service work
WARNING
Risk of scalding when carrying out service work.
There may be hot water in the fluff filter compartment. Scalding can occur when coming into contact with hot water
during service work.
A
Before starting service, drain the water from the fluff filter compartment.
Risk of burns when carrying out service work
WARNING
Risk of burns when carrying out service work.
Touching hot surfaces can cause burns.
A
Before starting service, let all surfaces cool down.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
11 von 35
03.12.2020