Type: Specifies the channel type for which the timer is set,
user can select the below options :
Channel: you can preset the time to switch to selected
channel. You can only enter START TIME but not
End Time and Duration.
Standby : you can preset the time you want the unit to go
into standby mode. You can only enter START TIME but
not End Time and Duration.
On : you can preset the time you want the unit to power ON.
Enter the start time and then switch off the unit. The unit
will power on at the preselected Start time.
Recorder : you can set the Channel you want to record,
the start time and the duration. After setting the duration,
the system will calculate the End Time automatically.
Then press OK key to confirm your settings and press
POWER key to enter the unit into standby mode.
Remark : WARNING ! Please do not omit to insert an USB
device in the USB port compatible for recording function.
If you select recorder type, it can be set Enable or Disable
options such as AD Record, Subtitle Record and Txt
Record.
Press "OK" after your settings and the system will return to
G
previous menu.
8.2.-
CHILD LOCK
Child Lock menu can provide convenient locked setup
G
1. Here you can set Enables or Disables the system lock,
and also can set the parental rating from 0 to 18.
2. You can revise system password.
(1)Press the 0-9 number key on the remote control to
input Old Password, the default password is set as
"0000".
(2)If the password is input correctly, the cursor can
move onto Input New Password option, press 0-9
number key on the remote control to input new
4-digit Password.
8.3.-
D TE TIME
Clock Menu contains different clock settings. Following
G
menu layout shows the Time Settings.
If the "Time Mode" is set to "Auto", then "Time Zone" and
G
"DST" shall be active for editing. If the Mode is "Manual",
these options shall be disabled.
If the "Time Mode" is set to "Manual" then, "Date" and
G
"Time" shall be active for editing. If the Mode is "Auto",
these options shall be disabled.
19