Cleaning And Maintenance - ChiQ CQHDU30T1T1W Manual De Instrucciones

CLEANING AND MAINTENANCE:

Disconnect range hood from power supply before cleaning or servicing.
Cleaning the surface of hood frequently. Use mild soap or detergent to clean the
hood.
Do not use harsh alkalis or abrasives.
Avoid the use of scouring powers or dishwasher compounds.
Grease filter may be washed using mild soap or detergent. (Heavy grease build-up
may not be cleaned easily and the filter may require replacement)
Charcoal filter cannot be cleaned and must be replaced regularly.
Cleaning water must not inter into motor, control switch etc. electrical parts.
It is recommendable to clean the metallic filter every three months by carrying out
the following instruction:
1. Remove the metallic filter from the cooker hood and wash it in a solution of
water and neutral liquid detergent, leaving to soak.
2. Rinse thoroughly with warm water and leave to dry.
3. The metallic filter may alter in color after several washes. This is not an issue.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
The carbon filer cannot be washed or recycled. It should be replaced after
approximately 2-3 months of use.
Install the connecting ring
The appliance has two exhaust holes:
One at the front.
One at the back
Chose a exhaust holes, then insert the
connecting ring in the exhaust hole, revolve
it some angles (about 10 ).
Install the carbon filter:
Push the carbon filter and then circumvolve
90 angle clock. (see Fig A)
Take-down the carbon filter.
8