Axis M1054 Guia De Instalacion página 10

AXIS M1054 Network Camera
Power LED
Green
Amber
PIR Sensor
The PIR (Passive Infrared) sensor detects motion by measuring changes
in infrared light. The sensor can for example be used in low-light
environments where video motion detection is not reliable. When
configured, the camera can automatically switch on the light when
triggered by the PIR sensor.
For more information on how to use the PIR sensor in action rules, see the
User Manual available on www.axis.com
Connectors and Buttons
For specifications and operating conditions, see page 11.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NO TICE TICE
NO NO TICE
The product shall be connected using a shielded network cable
(STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network
devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see
Electromagnetic Compatibility (EMC) on page 2.
I/O Connector
Use with external devices in combination with, for example, tampering
alarms, motion detection, event triggering, time lapse recording and alarm
Indication
Normal operation.
Flashes green/amber during
firmware upgrade.
10