After use, switch the appliance off (slide the switch downwards, number 0
visible).
Cleaning and care
Remove the assembled blade attachment 2 from the hand unit 3 and rin-
se it under running water.
Warning:
The hand unit 3 is only splashproof. NEVER submerse it in water. This could
irreparably damage the appliance.
Afterwards, dry the blade attachment 2 completely.
Should any hairs remain on the blade of the attachment, remove them
with, for example, a soft brush.
The blade can be cleaned periodically with a blade oil suitable for elec-
tric razors.
Important:
Do not use cleaning agents or solvents. They can damage the plastic
surfaces.
Keep the appliance in a cool dry place.
Remove the battery if you are not intending to use the appliance for a long
period.
- 21 -