nedis SPBT1003BK Guia De Inicio Rapido página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
During charging the product must be placed in a
well-ventilated area.
Some wireless products may interfere with
implantable medical devices and other medical
equipment, such as pacemakers, cochlear
implants and hearing aids. Consult the
manufacturer of your medical equipment for
more information.
Do not use the product at locations where the
use of wireless devices is prohibited due to
potential interference with other electronic
devices, which may cause safety hazards.
Charging the product
1. Plug the micro USB cable A
4
USB port A
.
2. Plug the other end of A
power adapter.
3. Plug the power adapter into a power outlet.
The charging indicator LED A
indicate the product is charging.
3
4
A
switches off when the battery is fully
charged.
Switching on the product
6
Use A
to switch the product on or off.
Pairing the product to Bluetooth
audio source
After switching on the product, A
the product emits a tone to indicate pairing mode
is active.
4
The product reconnects to any nearby, previously
paired devices that are switched on.
1. Enable Bluetooth on the device you want to pair
the speakers with.
2. Select "SPBT1003BK" from the list of available
Bluetooth devices on your device.
When paired successful, A
the product emits a tone.
7
into the micro
7
into a computer or
3
burns red to
3
blinks blue and
3
blinks blue slowly and
Wired connection
1. Plug the AUX cable A
2. Plug the other end of the AUX cable into an AUX
output of your audio source.
Controlling the music
Use your audio source to control the audio volume
and playback.
Light modes
Press light button A
different light modes.
Overview of the light modes
1. RGB cycling colours
2. Solid red
3. Pulsing red
4. Solid green
5. Pulsing green
6. Solid blue
7. Pulsing blue
8. Random RGB colours
9. No lights
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the
product SPBT1003BK from our brand Nedis
produced in China, has been tested according to all
relevant CE standards and regulations and that all
tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the
safety datasheet if applicable) can be found and
downloaded via:
nedis.com/SPBT1003BK#support
For additional information regarding the
compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
5
8
into the AUX port A
5
to cycle through the
,
®
2
.

Publicidad

Tabla de contenido
loading

Tabla de contenido