Publicidad
Idiomas disponibles
Idiomas disponibles
5 Initial use
Next, fill the food item into the grinding bowl. Pay attention to the maximum mark
("MAX"). Do not exceed this mark.
Then, replace the cover and press the On/Off key until the item to be ground has
achieved the required fineness. In the next step, simply open the grinder and re-
move the ground product. Thanks to the safety circuit, the device functions only
works when the cover is fixed properly.
Note: If you want to use the grinder once again immediately after the grinding
process, allow the device to cool down before the next use; this will help prevent
damage. Please note that this device is only suitable for a operation of maximum
30 seconds. Let the device cool down for at least 2 minutes.
After the operation, pull out the power plug from the socket. Open the cover of
the device and remove the blade unit. Then, clean the blade unit as described in
chapter 6.
Note: When you are using the device to crush food items with a high liquid content,
ensure that you do not overfill the container, else it may overflow. It is recommend-
ed that the device should be used to crush only dry foodstuff or food items with a
low liquid content.
6 Cleaning and care
Clean the device and its accessories with a soft damp cloth. Use a mild cleaning
agent. Do not use aggressive cleaning agents! Dry the device thoroughly after use.
Attention! Clean the blade units very carefully, as the blades are sharp!
19
English
Publicidad
