TTI 1604 Manual De Instrucciones página 5

DC Current
Range
4mA
400mA
10A (up to 1A)
10A (up to 5A)
10A (up to 10A)
AC Current (True RMS)
Range
4mA
400mA
10A (up to 1A)
10A (up to 5A)
10A (up to 10A)
Accuracies apply for readings between 400 and 4,000 counts. Additional error at crest factor = 3
is typically 1%.
Frequency
Range
4kHz
40kHz
Continuity and Diode Test
Continuity:
Diode Test:
Maximum Open Circuit
Voltage:
Maximum Input:
FURTHER FUNCTIONS
Hold:
T-Hold (Touch & Hold):
Min/Max:
Null (Relative):
4
Accuracy
0.1% ± 4 dig.
0.1% ± 4 dig.
0.3% ± 4 dig.
1.0% ± 4 dig.
3% ± 10 dig
Accuracy (45Hz - 10kHz)
0.5% ± 4 dig.
0.5% ± 4 dig.
0.8% ± 4 dig.
1.5% ± 4 dig
3% ± 4 dig.
Accuracy
0.01% ± 1 dig.
0.01% ± 1 dig.
4kΩ range selected; audible tone sounds for impedance <10Ω.
Test current approximately 1mA at 1V; displays voltages up to 3V.
4V
265V DC or AC rms.
Reading is frozen
Reading is frozen when stable.
Minimum and maximum readings stored.
Stores current reading and subtracts it from future readings. Up to
±1,000 counts can be nulled without restricting the measurement
range. Counts greater than ±1,000 can be nulled to give a Relative
reading but the measurement range is correspondingly reduced; OFL
shows in the display when the measurement range is exceeded.
Resolution
0.1µA Max. input 1A, 250V, fuse protected
10µA
1mA
1mA Max. input 10A, 250V, fuse protected
1mA
Resolution
1µA Max. input 1A, 250V, fuse protected
100µA
10mA
10mA Max. input 10A, 250V, fuse protected
10mA
Resolution Gate
0.01Hz 1s
0.1Hz 10s
Notes
Voltage burden <500mV
Voltage burden <500mV
Notes
Voltage burden <500mV
Voltage burden <500mV
Notes
Sensitivity set by
AC range setting