Belkin F8T061 Manual De Instrucciones página 13

P74500ea_F8T061_man.qxd 2/6/04
Pairing to a Bluetooth Technology-Enabled Phone
8.
Select "Belkin Headset" to initiate the pairing.
9.
Enter the passkey or pin "0000" (4 zeros). You should
see the LED lights switch from flashing blue/red to
flashing blue every three seconds.
10.
Your Headset is now ready to use.
3:49 PM Page 20
20
Pairing to a Bluetooth Technology-Enabled Phone
Pairing Process for Sony Ericsson P800
1.
Ensure that your Headset is turned off.
2.
Press and hold down the talk button. After approximately
eight seconds, the blue light will flash five times, indicating
the Headset is powered on. Do not release the button
until you see an alternating blue and red light. This indicates
the Headset is in pairing mode.
3.
From the application selection screen, select
"Control Panel".
4.
Select the "Connections" tab, then select "Bluetooth"
from the list.
5.
Select the "Settings" tab and bring down the "Operation
Mode" drop-down menu.
21
1
2
3
4
5