Inserting The Attachments; Connecting The Manicure/Pedicure Set - Easy Home GT-MP-03-us Manual Del Usuario

USA
Using the manicure/pedicure set
Fine sapphire disk and course sapphire disk
The fine sapphire disk
• Filing and forming fingernails and toenails.
Notices for use:
− Place the sapphire disk perpendicular on the nails.
− Treat your nails with uniform pressure.
− Work in slow movements.
− Prevent heating through friction by not holding the sapphire disk too long
on an area.

Inserting the attachments

1. Be certain that the drive unit
is centered (see fig. C).
switch 5
2. Choose the desired attachment
(see chapter "Choosing the right attachment").
3. Insert the attachment in the holder
fits in the holder (see fig. B). The attachment will audibly lock into place.
4. Check to make sure that the attachment is securely and properly in place.

Connecting the manicure/pedicure set

WARNING!
Risk of injury!
There is a risk of electric shock if you connect the manicure/
pedicure set to a line voltage other than that specified on the
nameplate of the power supply unit or if you use a different
type of power supply unit.
− Only use the power supply unit provided.
− Before use, check if the socket voltage corresponds with
the specifications on the nameplate.
− Check if the drive unit is turned off and the operating/
function switch is centered before you plug the power
supply unit into the socket.
You can only use the manicure/pedicure set when the drive unit
nected to a socket with the power supply unit
tents. For this, proceed as follows:
16
service@801service.net
6 and the course sapphire disk
1 is turned off and the operating/function
6 ,
17
7
7 , 8 , 9 , 10
. If necessary, turn it slightly until it
14 included with the pack con-
are suitable for:
, 11 or 12
1 is con-
AFTER SALES SUPPORT
1-866-558-8096
USA