Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Insert the desired attachment
drive unit as described in chapter "Inserting the attachments".
2. Be certain that the drive unit is turned off and the operating/function
switch
is centered (see fig. C).
5
3. Insert the connector cable
jack
13
on the drive unit. The connector will audibly lock into place.
4. Insert the power supply unit into a socket.
5. Turn the drive unit on by sliding the operating/function switch to the left
or right. Let the drive unit run for a few seconds to be certain that it has
reached its full capacity.
The manicure/pedicure set is now operational.
Switching the manicure/pedicure set on and off
CAUTION!
Risk of injury!
Handling the manicure/pedicure set improperly may result in
injury.
− Do not change the attachments and do not touch them
when the drive unit is switched on.
− Check if the drive unit is turned off and the operating/
function switch is centered before you plug the power
supply unit into the socket.
− After each use, switch the drive unit off and disconnect it
from the power supply.
− Pull the attachment off of the drive unit and stow all acces-
sories in the storage bag once you have cleaned them.
You can use the manicure/pedicure set with clockwise or counterclockwise
rotation depending on your personal requirements. Right- and left-handed
persons can use the manicure/pedicure set equally. You can continuously
adjust the rotational speed with the
1. Be certain that the desired attachment
is inserted in the drive unit
attachments".
2. Be certain that the drive unit is properly connected to the power supply as
described in the chapter "Connecting the manicure/pedicure set".
AFTER SALES SUPPORT
1-866-558-8096
USA
6
,
7
,
8
,
15
of the power supply unit into the connector
2
and
,
6
1
as described in the chapter "Inserting the
Using the manicure/pedicure set
9
,
10
,
11
or
3
buttons.
,
,
,
7
8
9
10
service@801service.net
USA
12
into the
,
or
11
12
17
Publicidad
Capítulos
Tabla de contenido
