Important - EGAmaster 65514 Manual De Instrucciones

Use this level on the ground, other horizontal objects or the tripod:
Put it on the ground or other horizontal objects (there is an auto-setting inside without any adjustment before using), turn on Power
button. A horizontal laser-line and a laser vertical laser-line will be lighted. If the angle exceeded ±3° there will be a glitter-alarm. If
this is the case, the level is unlevelled. If the level is on surfaces, adjust the level with the levelling-screw. If the level is on the tripod,
adjust the tripod. When the glitter-alarm disappears, the level is adjusted. Now the equipment is levelled.
Connect with rings to use:
The Standard Self-levelling Laser Level can be hung on at any height with the rings at the top of the level.
Whenever the laser level is not being used, it must be maintained in OFF position. It is a security measure for the inner device not
to damage it or to strike it in abrupt movements, displacement,...When the level is ON, the internal auto levelling device gets free to
move.
- Don't stare at the laser beam with eyes directly.
- Don't stare at the laser beam with optical apparatus directly.
- Don't let child touch or close to the laser beam.

IMPORTANT!

The maker will not take responsibility for damage or malfunction as a result of the Testing Pump being incorrectly used or, applied
for a purpose for which it was not intended.
The maker guarantees to the machine owner 12 months against any manifacture defect.
This guaranteee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the "GUARANTEE CERTIFICATE" duly filled within one week after purchased
the machine to the maker.
OPERATION INSTRUCTION
NOTE
WARNING
NOTE
GUARANTEE
-5-