Care & Cleaning; Installation Instructions - Wider IMP50250BH Manual De Instrucciones

CARE & CLEANING
Periodic cleaning of your ceiling fan is the only maintenance required.
Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you do
so.
Do not use water when cleaning your ceiling fan. It could damage the motor or the plastic blades and
create the possibility of an electrical shock.
The motor has a permanently lubricated ball bearing, and as such is maintenance free.
Functions Transmitter
When you would like to operate ceiling fan by remote controller, you
should the transmitter pointing to I. R. Sensor
OFF: Turn off ceiling fan.
HI: Turn on ceiling fan at high speed.
MED: Turn on ceiling fan at medium speed.
LOW: Turn on ceiling fan at low speed.
LIGHT: ON/OFF-Press and release immediately to turn on or off the
light
1H: Setting up that the ceiling fan will off power after 1 hours
automatically
2H: Setting up that the ceiling fan will off power after 2 hours automatically
4H: Setting up that the ceiling fan will off power after 4 hours automatically

INSTALLATION INSTRUCTIONS

CAUTION: Incorrect wire connection would damage this receiver.
1. Ceiling fan must be set at High speed by pulling the "Pull Switch" after installation.
2. For fans that are not drop rod style (i.e. Flush Mount styles) the appropriate conversion kit
should be used. The fan should be installed and hanging from the ceiling.
3. Make the wiring connection as shown in Fig.1.1.IR senor must be stuck outside canopy.