1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VQS4RT4! Please read the manual thoroughly before bringing this device into service. Make
sure that the device was not damaged in transit. If it was, contact your dealer and postpone installation of this device.
2. Back Panel + Connections
• You can connect up to 4 cameras.
• Each cannel is equipped with a
video gain adjustment (G1, G2, G3, G4).
• There are 2 outputs:
The SWITCH output emits the display mode you selected; connect this output to a TV or monitor.
The QUAD output emits the quad display (all 4 channels on 1 screen) continuously; you may want to connect
this output to a video recording device.
• This device requires a 12V DC 500mA power supply. Mind the polarity.
3. InstaIIation
• Connect the cameras to the inputs at the back (1, 2, 3, 4).
• Connect the SWITCH and QUAD outputs to a TV, a monitor or a video recording device.
• Connect the 12Vdc power supply to the unit and plug it into the mains.
4. Front Panel + Operation
• Press QUAD to see all 4 channels simultaneously.
• Press the SWITCH key to see the quad display
followed by the full screen displays of the channels in the order as shown on the front of the device in an endless
loop. Dwell time is 3 seconds.
• Press one of the direct channel selection keys to see that channel in full screen mode.
5. CE Certification
VQS4RT4
VQS4RT4 – B/W QUAD PROCESSOR
EC Declaration of Conformity from ETS Dr. Gens GmbH Germany.
Test Report Number: U4M20211-2180-E-16
1
VELLEMAN