Pegperego After-Sales Service - Peg-Perego DOUBLE ADAPTER YPSI/Z4 Instrucciones De Uso

3 The Ypsi chassis can be opened once the
adapters have been fastened (fig_a).
To release Adapters A from the chassis
- close the chassis;
- press on the side of the adapter as show and
lift it (fig_b).
ADAPTERS B
1 Fasten the adapter directly to the chassis,
making it coincide with the chassis'
mushroom button, as shown.
2 Before closing the red tab on the side of the
adapter, take care to exclude the brake wire.
Close the tab until it clicks. Once secure,
proceed in the same way on the other side of
the chassis.
To unfasten Adapters B from the chassis,
perform these operations in reverse order.
COMBINATION
3 WARNING: Fully extend the chassis' handlebar.
ALL THE POSSIBLE COMBINATIONS:
Refer to the illustrated page 5.
WARNING, FORBIDDEN COMBINATION:
Refer to the illustrated page 6.
PEGPEREGO S.p.A.
PegPerego SpA adopts a quality
management system certified by TÜV Italia
Srl in accordance with the ISO 9001 standard.
PegPerego can make changes at any time to
the models described in this publication for
technical or commercial reasons.
PEGPEREGO AFTER-SALES
SERVICE
If any parts of the item get lost or damaged,
only use genuine PegPerego spare parts.
For any repairs, replacements, information
on the products and sales of genuine
spare parts and accessories, contact the
PegPerego Assistance Service and state the
serial number of the product, if present.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.it
website www.pegperego.com
All intellectual property rights on the
contents of this manual are property of
PegPerego S.p.A. and are protected by the
laws in force.
12